Plumbing Upgrades That Will Help You Conserve Water

27 April 2018
 Categories: , Blog

Share

If you're not thinking about how you can save water in your home, you might be living in the wrong century. Using less water in homes has become a very big deal in modern times. This is because of the limited supply of resources such as fresh water.

Additionally, the cost of water has been on the rise. Every homeowner should be thinking about how to use water more efficiently for the good of their pocket and for the good of the planet. There are several upgrades you can make to your plumbing to help with this.

Water Pressure Repair

While you may think of water pressure repair as a service used to bring pressure up, it can also be used to bring pressure down. Pressure reducing valves are a common way to reduce the amount of water flowing through the pipes, thereby saving water with every minute the tap is on.

Low-Flow Toilets

Toilets are among the heaviest users of water in a modern household. Each time someone flushes a conventional toilet, they are sending between 3.5 and 5 gallons of water down the drain. That's a lot of water. In a large household or business, this can amount to a significant volume of water every single day.

On the other hand, there are now low-flow toilets in the market that only use 1.6 gallons for flushing. This difference is significant. Low-flow toilets may have started off on a rocky patch but they have improved a lot since then.

Low-Flow Faucets

Some experts estimate that faucets installed before 1992 used between 3 to 7 gallons every minute. Although it's only on a few occasions where a faucet is turned on for this long, a typical household has many faucets. These can be turned on many times over the course of a single day and this adds up.

Modern facets are not allowed to output more than 2.2 gallons of water per minute at a water pressure of 60 psi. Additional features such as longer heads, extensions, easy shutoff, and low-flow designs have further increased how efficiently faucets operate.

Low-Flow Showerheads

The shower is yet another part of the plumbing that can use some water saving upgrades. A regular shower head can output around 2 gallons of water every minute. With a low-flow shower head, you can reduce this amount by 25% or even more.

Some modern shower heads come with an aerator design which ensures you don't have to sacrifice water pressure by using a low-flow showerhead.

You can talk to a plumbing contractor to find out where else in your home can use a water saving upgrade. There are many other machines and fixtures that use lots of water in a modern home.